Coffee Dosage Setting - BORETTI BARISTA Notice D'emploi

Coffee Dosage Setting

See also Fig. 02 below:
1. Prepare and fill the filter holder with ap-
proximately 7 grams of ground coffee and
attach the filter to the delivery group.
Place the appropriate cup(s) underneath
the filter holder spout(s).
2. Push and hold down the "star" key (5) for
few seconds until all LEDs on the touchpad
switch ON to access the programming
mode.
3. Push the key related to the selected
dosage: the relevant LED switches ON.
4. Push the same key again when the correct
quantity of coffee has been reached: the
relevant LED switches OFF.
5. Repeat steps 2, 3 and 4 for setting the
dosage of the remaining dosage keys.
No. Description
1 Automatic dosage for espresso, single cup
2 Automatic dosage for large coffee, single cup
3 Automatic dosage for espresso, 2 cups
4 Automatic dosage for small coffee, 2 cups
5 "Star" key
1
Fig. 2
38
2
Note:
Programming the keys has to be completed
within 10 seconds (per key), otherwise the pro-
gramming mode will automatically switch OFF.
3 4 5