Chacon 34548 Guide D'utilisation Rapide page 30

FAQ
Forget Username / Password
Restore camera back to factory settings:
1. Press «Reset» button for about 10 seconds with camera powered on.
2. Release the button and wait about 30 seconds, the camera will automatically
restart, and restore factory settings.
Please Note:
After restore to factory default settings, you need to cong the Wi-Fi connection
again, you can follow the Setup Wizard of the App to add again.
In case your device failed to add by Wi-Fi, you can use WPS or wired connection.
please refer to the User Manual on the CD.
EN