Before Use; Safety Instructions - JB Systems Light FLASH ROPE RANDOM Mode D'emploi

Table des Matières

Publicité

ENGLISH
®
Thank you for buying this JB Systems
product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device has been designed to produce decorative effect lighting and is used in light show systems.
 Wonderful strobe effect for all kinds of decorations!
 The waterproof (IP44) 5m electrical wire contains 12 strobes, all flashing at random speed.
 Perfect for decoration of:
o
Gardens, garden parties, ...
Outdoor Christmas events (Christmas trees, ...)
o
Advertising boards and stores (draws peoples attention!)
o
o
Entrance of pubs, discotheques, ...
Shopping streets during dark winter evenings, ...
o
Aluminium truss
o
Fairground attractions
o
...
o
 Ideal for mobile use: just plug the lightweight poly-carbonate flash rope in any 230V wall socket to start the
wonderful effect.
 A strong "fixing eye" at the end of the chain makes it easy to install the flash rope
 Special mounting clips are included for easy installation.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 Flash Rope
 4 Mounting clips
 4 Screws

Safety instructions:

CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
JB SYSTEMS
®
OPERATION MANUAL
CAUTION: To reduce the risk of electric shock, do not
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
1/17
FLASH ROPE RANDOM
ENGLISH
This symbol means: Read instructions
This symbol means: Safety Class II appliance
The device is suitable for mounting on standard flammable surfaces. Standard flammable
surfaces include building materials such as wood and wood-based materials more than 2mm
thick.
 To protect the environment, please try to recycle the packing material as much as possible.
 Keep the unit away from children.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 Don't connect the unit to any dimmer pack.
 In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering
from epilepsy.
DESCRIPTION:
The Flash Rope is IP44 waterproof and suitable
for outdoor and indoor use.
1. Mains connection
2. control unit
3. strobe case
4. fixing eye
OPERATING INSTRUCTIONS
 Once connected to the mains the device starts running.
 Regular breaks during operation are essential to maximize the life of this device as it is not designed for
continual use.
 Do not switch the unit on and off in short time intervals as this reduces the lamp life.
 Always unplug the unit when it is not used for a longer time.
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 Important: Never look directly into the light source! Don't use the effect in the presence of persons
suffering from epilepsy.
SPECIFICATIONS
Mains Input:
AC 230V, 50Hz
Power consumption:
8 Watt
Flash rate:
random (0.5 to 1 flashes per second)
Fuse:
250V 1,5A
Length
5 m
Weight:
0,82 kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS
®
OPERATION MANUAL
2/17
FLASH ROPE RANDOM

Publicité

Table des Matières
loading

Table des Matières