Intended Use; Appliance Description - Olimpia splendid Bi2 Air TR Mode D'emploi Et D'entretien

0.4 - INTENDED USE

• These appliance have been built for conditioning and/or heating of rooms
and shall be destined for this use compatibly with their performance
characteristics.
• This appliance is only destined for domestic use or similar.
• An improper use of the appliance with possible damages caused to people,
property or animals relieves OLIMPIA SPLENDID from any liability.
1 - APPLIANCE DESCRIPTION (Fig.1)
The fan radiators/fan coils of the array are divided into two base types SL and SLR, each of which has been
built in models of different performances and dimensions.
SL fan coil, suitable for horizontal or vertical installations.
SLR fan radiator with radiant panel, suitable for vertical installations.
1. Bearing structure
made of high-resistance electrogalvanized steel sheet.
2. Heat exchange battery
made of copper pipes and aluminium pack lugs. Threaded coupling of the type eurokonus 3/4, compliant
with the new community standardization needs.
The battery is equipped with a sensor for detection of water temperature.
3. Electronic control cabinet
4. Ventilating unit
including tangential fan made of synthetic material with staggered lugs (high noiselessness) mounted
on anti-vibrating EPDM supports, statically and dynamically balanced, keyed directly on the motor shaft.
5. DC low-consumption brushless electric motor
with resinated pack mounted on EPDM anti-vibrating supports.
6. Delivery air deviation flap
7. Condensation collection basin for vertical installation
made of ABS, easy to dismount for cleaning operations.
8. Radiant panel
highly efficient, connected to the hot water battery (SLR version).
The hydraulic unit is equipped with a calostat valve which prevents the entrance of cold water in the
panel.
9. Removable front cover
10. User interface with touch control and visualization of control parameters
EN - 7
Bi2 Air TR