Olimpia splendid Bi2 Air TR Mode D'emploi Et D'entretien page 54

20. In case water leakages, set the main switch of the system to "OFF" and
close the water valves.
Call, as soon as possible, the Technical Assistance Service of OLIMPIA
SPLENDID or professionally qualified personnel and do not intervene
personally on the appliance.
21. Disassembly, repair or reconversion by an unauthorized person may cause
serious damages and will nullify the warranty of the manufacturer.
22. Do not use the appliance in case of failure or bad operation, if the cord or
plug are damaged or if the appliance has been dropped or damaged in any
way. Switch off the appliance, disconnect the plug from the power socket
and have it checked by professionally qualified personnel.
23. Do not disassemble nor modify the appliance.
24. Repairing the appliance by yourself is extremely dangerous.
25. A temperature too low or too high, depending on the modes of operation, is
harmful to health and constitutes an useless waste of energy.
Avoid direct contact with the air flow for a prolonged period.
Avoid that the room remains closed for a prolonged period.
Periodically open the windows to ensure correct air recirculation.
26. Any cleaning operation is prohibited if the appliance has not been
disconnected from the electricity distribution network by setting the main
power switch to "OFF".
27. It is prohibited to change the safety or adjustment devices without
authorization or indications of the appliance manufacturer.
28. It is prohibited to step on the appliance and/or to place any type of object
on it.
29. The appliance can reach temperatures higher than 70°C on the external
components.
PAY PARTICULAR ATTENTION TO CONTACT, DANGER OF BURNS.
30. OLIMPIA SPLENDID's fan radiators/fan coils are compliant with the
European Directives:
• Low voltage directive 2014/35/EU
• Electromagnetic compatibility directive 2014/30/EU.
• RoHS directive 2011/65/EC.
In any case, since they are incorporated inside the system, conformity
of the fan radiators / fan coils in a specific system shall be verified and
ensured by the installer in compliance with the applicable laws and rules.
EN - 6