Franke FPL 607 I Mode D'emploi Et Installation page 13

Metal grease filters
The Filters can be washed in the dishwashing. They
need to be washed when FF-sign appears on the display
or in any case every 2 months, or even more frequently
in case of particularly intensive use of the hood.
Alarm reset
• Switch off the hood and the lights. If the 24h-
function has been activated this has to be deactivated.
• Press the E-key till the display is unlit.
Cleaning the filters
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
• Any kind of bending of the filters has to be avoided
when washing them. Before fitting them again into
the hood make sure that they are completely dry.
(The colour of the filter surface may change through-
out the time but this has no influence to the filter ef-
ficiency).
• When fitting the filters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
EN
1
13
3