Introduction; Device Description; Installation; Rigging - Evolite Diamond 19x15 Z Mode D'emploi

 Introduction
Thank you for selecting this professional fixture from evolite
This new intelligent Moving Wash will provide you reliability, latest features, and professional lighting
effects for a long period of time.
This evolite fixture is complying with European standards: EN60598-1:2008+A11:2009
17:1989+A2:1991 et RoHs.
 Device Description
> Wash LED moving head with zoom and flower effect
> Light source : 19x15W OSRAM
> DMX operational mode : 21 - 23 – 35 – 78 – 92 - 97 channels
> Pan : 540°/tilt:270°
> Strob effect with variable speed
> Pixel control of each LED
> Dimmer(0-100%) with different curves
> Clear display for control panel
> Pan/tilt optional inversion
> 19 LED of 15 Watts Osram.
> Motorized Zoom
> Flower effect with rotation
> Powercon power supply connectors IN an OUT
> Power supply : 110V- 250V / 50-60Hz
> Power consumption : 300W max
> Dimensions : 370x260x420 mm
> NW : 14.55 kg
> GW : 15.55 kg
 Installation
o Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the projector. If you lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily injury and or damage to
property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable!
Diamond 19x15z Manual Ver. 1.00
EN60598-2-
15
Page