Jura 72168 Mode D'emploi page 4

Professional fine foam frother / Fine foam frother
J These instructions apply to the professional fine foam frother and
the fine foam frother.
The fine foam frothers can be fitted to all JURA machines featuring the
Connector System
Dismantling and rinsing the fine foam frother
The fine foam frother must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests of
hygiene.
T
Carefully pull the fine foam frother off the Connector System
T
Dismantle the fine foam frother into its individual parts.
é
Professional fine foam frother
T
Rinse all the parts of the fine foam frother thoroughly under running
water.
T
Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly connected
to ensure optimum operation.
T
Firmly attach the fine foam frother to the Connector System
E In the interests of hygiene, we recommend changing the inter-
changeable milk spout
2 months). Replacement spouts are available from specialised
dealers.
4
.
©
è
1
Fine foam frother
on a regular basis (approximately every
.
©
.
©