Automatic Switching From Dab To Rds - Kenwood KTC-9090DAB Mode D'emploi

DAB service and RDS station are
broadcasting the same programme.
When the receiving signal of a DAB
station deteriorates, the reception can be
switched automatically to the RDS station
broadcasting the same radio programme,
allowing listeners to continue listening to
the same programme.
On the contrary, when an RDS station is
being received, the reception can be
switched automatically to the DAB station
broadcasting the same radio programme,
allowing the same programme to be
heard at a higher sound quality.
Service of DAB:
RDS:
Source mode:
DAB
RDS:
Service of DAB:
Source mode: TUNER
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"DAB PRIORITY"/"DAB-P"
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
F group
Set this function on the DAB Setup
Screen. (page 9)
NOTE
• When the receiving signal of a DAB
station deteriorates, the reception can be
switched to the RDS station, however,
when the receiving signal of a DAB
station recovers, the reception can be
switched to the previous condition.
The DAB indicator blinks during the
period of switching to the RDS station.
(except for F)
• Switching the reception from the RDS
station to the DAB station causes
switching the source mode to the DAB
source. After this, every operation enters
DAB mode. For selecting other FM/AM
stations, switch the source mode to the
TUNER source mode before selecting.
• If the tuner of the Control unit provides
no RDS function, this function does not
work.
• It takes at least 10 seconds after
receiving the RDS signal to switch from
the RDS station to the DAB service.
DAB DAB
DAB
Automatic Switching from DAB
to RDS
Presently, the coverage areas of DAB
stations are smaller than those of RDS
stations. Therefore, when the receiving
condition of a DAB station deteriorates,
the reception can be switched
automatically to the RDS station
broadcasting the same radio programme
to minimize the sound interruption. The
DAB indicator blinks during the period of
switching to the RDS station.
Service of DAB:
RDS:
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"SW RDS"/ "RDS CHG"/ "RDS"/
"Switching to RDS"
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
E group
Set this function on the DAB Setup
Screen. (page 8)
NOTE
• When the receiving signal of the DAB
station recovers, the reception can be
switched to the DAB source.
• If the tuner of the Control unit provides
no RDS function, this function does not
work.
ÅBCDEÏÌ
21