Opening The Door In Case Of Power Failure - SciCan HYDRIM C61w G4 Manuel De L'utilisateur

4. Using your HYDRIM
4.9 Opening the door in case of a power failure
If there is a power failure, locate the lever on the top edge of the door, slide it to the right
and pull the door open. Exercise caution! There may be fluid remaining in the unit and the
instruments may be hot. If the cycle was interrupted, instruments should not be used and
should be reprocessed.
Cycle count
This allows the user to see how many cycles have been run on
the HYDRIM. Touch cycle count and the number of cycles
(completed and aborted) will be displayed. This cannot be reset.
Touch the back arrow to return to the previous menu.
Instructions
Users can access a database of pictorial instructions on how to
perform routine maintenance such as installing the cleaning solution.
Page 27