Cleaning Solution - SciCan HYDRIM C61w G4 Manuel De L'utilisateur

3. Setting up your HYDRIM
Recommended precautionary measures with regard to safe handling of HIP™ Ultra cleaning
solution.
• Always wear undamaged gloves made of natural or butyl rubber, nitrile, or neoprene
(Surgical gloves are ideal).
• Always wear eye protection.
• Protect exposed skin on arms.
• If solution is spilled on clothing, remove the item of clothing and wash affected skin with
plenty of water, in accordance with the Material Safety Data Sheet requirements.
• Use good industrial hygiene practices in handling this material. When handling,
do not eat or drink.
• After handling the product, remove and dispose of gloves and wash hands prior to
removing eye protection.
• Do not use the personal protective equipment you use for clinical activities to handle
HIP™ products.
• Always ensure that personal protective equipment, if contaminated with HIP™ Ultra
cleaning solution, is cleaned, or disposed of as appropriate.
For comprehensive data on HIP™ Ultra cleaning solution, please visit SciCan.com to view
or download a PDF of the Material Safety Data Sheet.
To install the HIP™ Ultra cleaning solution bag, follow these steps:
1 2 3
1 2 3 4
4 5 6 7
Turn the power
OFF, open the
door and pull out
the chemical
drawer.
5 6 7
Ensure
the nozzle is
in the correct
position.
1 2 3 4
www.scican.com
1 2 3 4 5 6
Lot number:
L0T334.11.2012
Product: CS-HIPC-U
8X 750ML /
25.4 U.S. fl. oz.
Page 9
5 6 7
Place a new bag
in the chemical
drawer.
7
Connect
the new bag,
close the door
and power
the unit ON.