Technical Data; Power Supply - geo-FENNEL S-DIGIT MINI+ Mode D'emploi

Technical Data

Working range
Resolution
Accuracy

Power supply

Operating time
Size
Weight
POWER SUPPLY
Replace the batteries: Open the battery compartment cover and
insert the batteries (ensure correct polarity)
When replacing the batteries always power off the instrument!
When the batteries have been replaced the instrument will power
on automatically.
Display indication: „GOOD" , then „-0-" .
Now a calibration must be made - see „Check and calibration" .
Important:
If the battery symbol flashes the batteries need to be replaced.
4 x 90°
0,1 ° / 0,1 %
0° + 90° = ± 0,1°
1° - 89° = ± 0,2°
3 x AAA alcaline
600 h
156 x 56 x 31 mm
0,3 kg incl. batteries
EN
C
11