Signature SCT1003A+X Instructions D'utilisation page 28

figure 1 figure 2
Figure 1: Represents position of components prior to door reversal
Figure 2: Represents position of components after door reversal
Installing the handles
This refrigerator has been built with external handles, which are in poly
bag. Please follow instruction below to install them:
1. Remove two screws(17) by a cross screwdriver.
2. Take out the handles(18) and fix it with the two screws(17).
3. Cover the two screws(17) with two caps(19). The caps are in a small poly
bag together with the handles.
17 19 17
18
figure 1 figure 2 figure 3
Figure 1: Front view without handles
Figure 2: Exploded view of installing the handles
Figure 3: Front view with handles
-26-