Starting Your Lifebook Notebook; Power On; Power/Suspend/Resume Button - Fujitsu LifeBook S710 Guide D'utilisation

Starting Your LIFEBOOK Notebook

Power On

Power/Suspend/Resume Button

The Power/Suspend/Resume button is used to turn on your notebook from its off state. Once you have
connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook.
To turn on your LIFEBOOK notebook from its off state, press the Power/Suspend/Resume button, located
above the keyboard to the right. When you are done working you can either leave your notebook in sleep
mode, (see "Sleep Mode" on page 56), or you can turn it off, (see "Powering Off" on page 58).
When you power on your LIFEBOOK, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your LIFEBOOK notebook will emit
an audio warning and/or an error message will be displayed. (See "Power On Self Test Messages" on
page 96.) Depending on the nature of the problem, you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the
POST, your notebook will load your operating system.
W
HEN YOU TURN ON YOUR NOTEBOOK
ONE BATTERY IS INSTALLED AND CHARGED
D LIFEBOOK
O NOT CARRY YOUR
,
OR VIBRATION AS YOU RISK DAMAGING IT
N LIFEBOOK
EVER TURN OFF YOUR
WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR
. See "Power On Self Test Messages" on page 96.
THE NEXT TIME
,
BE SURE YOU HAVE A POWER SOURCE
,
OR A POWER ADAPTER IS CONNECTED AND HAS POWER
NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS
.
NOTEBOOK DURING THE
48
. T
HIS MEANS AT LEAST
P O S T (POST)
OWER N ELF EST
LIFEBOOK
NOTEBOOK ON
.
OR IT