T
HE COMPONENTS LISTED ARE COLOR
THAT THE COMPONENT CAN BE INSTALLED
INSTALLED SEPARATELY
CAN BE REINSTALLED
COMPONENT IS ALREADY INSTALLED
4
In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green
components separately.
5
Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
6
After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
Restoring the Operating System for Windows
The Recovery and Utility disc contains four utilities:
• The Recovery utility allows you to restore the system operating system (OS). The restored OS is
the same one that was originally installed on the hard disk drive. After the OS is restored, you will
need to reinstall the drivers and applications from the Drivers and Applications Restore disc and
from any application discs that were bundled with the system when you purchased it.
• The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk
and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are
absolutely certain that you want to erase your entire hard disk, including all partitions.
• The Partition Creation utility allows you to create a new D: partition or resize existing
partitions on your hard disk. NOTE: Creating or resizing partitions with this utility will cause
all data on the hard disk to be completely erased.
• The Diagnostics utility allows the IT professional to determine device status/condition by
executing diagnostics tests on selected system components.
-
CODED IN TERMS OF THEIR INSTALL STATUS
. G
REEN INDICATES THAT THE COMPONENT NEEDS TO BE
. G
REY INDICATES A COMPONENT THAT IS ALREADY INSTALLED
,
BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE
.
102
. B
LUE INDICATES
;
GREY ITEMS