Storage; Troubleshooting - Proficook PC-FW 1060 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
CAUTION:
• Do not use a wire brush or other abrasive
utensils for cleaning.
• Do not use aggressive or abrasive cleaning
agents.
Motor assembly
• Only wipe the motor assembly with a damp cloth
and dry with a dry cloth after.
Filling tray, spiral, spiral housing and all acces-
sories
CAUTION:
Do not clean these parts in the dishwasher. The
surfaces could become lacklustre.
• These parts can be cleaned by hand in the wash
basin.
• Rinse with clear water and dry the parts.

Storage

• Clean the device as described. Let the acces-
sories dry completely.
• We recommend that you store the device in its
original packaging when it is not to be used for a
longer period.
• Always store the device at a well ventilated and
dry place outside the reach of children.
• Regularly coat the steel discs with vegetable oil.

Troubleshooting

Malfunc-
Possible
tion
cause
The
The device is
device
not supplied
does not
with power.
function.
The device is
defective.
The
Meat residue
device is
is sticking to
blocked.
the spiral.
Remedy
Check the outlet
with a different
device.
Insert the power
plug correctly.
Check the mains
fuse.
Contact our Ser-
vice or a specia-
list.
1. Set the switch
(3) to " " and
wait until the
motor has stop-
ped.
2. Set the switch
(3) to "R" to loo-
sen the blocked
meat residue.
3. Switch the de-
vice off and pull
the power plug.
4. Now remove
any sticking
residue.
47

Publicité

Table des Matières

Dépannage

loading

Table des Matières