Sony SPP-A400 Mode D'emploi page 7

Connect the base unit
If you want to hang the base unit on the wall, see page 27.
Hook the cord.
3
To AC outlet
AC power adaptor
2
(supplied)
To telephone outlet
Telephone line cord
(supplied)
4
1
To DC IN 9V
To LINE
1
Attach the wall bracket on the
bottom of the base unit as
illustrated to use it as a stand.
2
Connect the telephone line cord
to the LINE jack and to a
telephone outlet.
3
Connect the AC power adaptor
to the DC IN 9V jack and to an
AC outlet.
"P" flashes in the message
counter.
4
Fully extend the antenna.
Make sure it points toward the
ceiling.
Message counter
Align the ¢
marks.
2
1
continued
EN
7
Getting Started