Picking Up New Messages - Sony SPP-A400 Mode D'emploi

Picking up new messages

1
Call your phone from a touch-tone phone.
2
When you hear the greeting, enter (#), followed by your
security code.
You hear a long confirmation beep and the greeting stops.
Following the number of messages recorded, you'll hear the
new messages.
If there are no new messages, the phone stands by for you to
enter a control code.
3
To do other operations, enter the control code within 20
seconds (see the table below). To quit, hang up the phone.
Control codes for remote operations
To
Play back messages
Repeat the current message
Skip the current message
Erase the current message
Erase all the messages
Record a new greeting
(up to one minute)
Turn on the answering function
Turn off the answering function
Stop the current operation
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then the
answering function automatically turns on.
Notes
• If you have not recorded the greeting, the phone does not answer.
• If you enter a wrong security code three times, the line will be disconnected.
Tip
Cut off the Remote Control Card from the supplied Quick Start Guide and carry
it with you to see how to operate from an outside phone.
To use the toll-saver feature
Set RINGER SELECT to TS. See page 20 for details.
Press
(#) (2)
(#) (1)
(#) (3)
(#) (4) while the message is being played back
(#) (4) when your phone is waiting for further codes
(*) (7). When you hear a long beep, start recording your
greeting. Press (*) (*) to stop recording.
(*) (0)
(#) (0)
(*) (*)
Answering Machine Features
25 EN