Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Rear Panel
1.
XLR-1/4" TRS input: Connect a microphone
or line-level device to the XLR-1/4" (6.35 mm)
input.
2.
XLR-1/4" TRS input: Connect a microphone
or line-level device to the XLR-1/4" (6.35 mm)
input.
Note: Ensure that phantom power is turned
off before connecting a line-level device to
the XLR-1/4" inputs. If you connect a line-
level device while phantom power is being
supplied, this can damage the device or this
unit.
Note: When using a condenser microphone,
before connecting to and disconnecting from
the XLR-1/4" inputs, ensure that phantom
power is turned off. If you connect or
disconnect a microphone while phantom
power is being supplied, this can damage the
unit or the microphone.
Note: Do not connect a dynamic microphone to an XLR-1/4" input when phantom power is
turned on. Doing so could damage the microphone or this unit.
3.
1/8" Input: Connect the audio output of a DSLR camera to this 1/8" (3.5 mm) TRS input.
4.
1/8" Output: Connect this 1/8" (3.5 mm) TRS output to the audio input of a DSLR
camera.
5.
Hot Shoe Mount: Attach a DSLR camera on top of this hotshoe mount.
6.
Threaded Insert: Connect your mounting adapter from a tripod, digital recorder, or lighting
panel here.
4
5
1
LEFT
7
12
5
3
2
MONITOR IN
RIGHT
OUT
6
11
4
Publicité
Table des Matières
