Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Recording movies

1
Remove the lens cap. Set the mode dial to
the POWER switch.
2
Point the camera towards a
subject while viewing through
the viewfinder.
3
Press the shutter button halfway.
● When the subject is in focus, the green lamp
blinks once.
4
Press the shutter button all the way to start
recording.
● During movie recording,
5
Press the shutter button all the way again to stop recording.
● The card access lamp blinks and the camera starts writing the movie to
the card.
● If the displayed seconds remaining reach "0", shooting finishes
automatically and the camera starts writing the movie to the card.
Power switch
Card access lamp
lights in red.
Mode dial
setting
and press
AF target mark
Seconds remaining
25
En

Publicité

Table des Matières
loading

Table des Matières