Recording movies
1
3
Gently and slowly press the Shutter button. The AF
confirmation mark lights. This state means that the
Shutter button is pressed halfway. The focus and
exposure are locked. At this moment, do not release the
Shutter button.
4
Press the Shutter button all the way
from the position pressed halfway.
This state means that the Shutter
button is pressed fully. Recording
starts. During recording, correct
focusing
and
maintained continuously.
5
Press the Shutter button to stop
shooting. You cannot take the next
movie until the camera is finished
storing the current one, even if the
memory gauge indicates that there
is sufficient memory.
Memory gauge
Shooting another
movie is possible.
When the card access lamp stops blinking
Writing of movie to the card is finished. If there is space on the card, the number of
seconds remaining is displayed. You can start shooting another movie.
2
Point the camera towards the subject and
compose the picture.
exposure
If the entire memory gauge lights up, additional recording is not possible.
Shooting another
movie is not possible.
During movie recording, the
lights in red.
are
The card access lamp blinks and the
camera starts writing the movie to the card.
indicator
Seconds remaining
17