Olympus CAMEDIA C-720 Ultra Zoom Manuel De Base page 34

PLAYBACK (Cont.)
En
4
Press
● A bar is displayed to show the progress of formatting.
● To cancel formatting, select NO in step 3 and press
● All existing data stored on the card is erased when the card is formatted.
Make sure that you save or transfer important data to a PC before
formatting a used card.
Playback on a TV
1
Make sure that the TV and camera power are off .
2
Connect the camera to the TV using the video cable.
Connect to the TV's video
input (yellow) terminal
3
Set the mode dial to
TV. Set the TV to the video input mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● Video signal is either NTSC or PAL compatible depending on the standard
in the intended area of distribution.
34
to start formatting.
Mode dial
setting
Video cable
and press the POWER switch. Turn on the
Note
Note
.
Connect to the
VIDEO OUT jack.