Technical Data - MSW IR-DRYER3000.2 Manuel D'utilisation

SYMBOLS
The operation manual must be reviewed.
Never dispose of electrical equipment together with household waste.
This machine complies to the CE declarations.
Attention! Hot surface may cause burns
Attention! The hand can be squeezed
Attention! Wear protective gloves.
Attention! Risk of fire or explosion.
Attention! Risk of accident.
Drawings in this manual are for illustration purposes only and in some details it
PLEASE NOTE!
may differ from the actual machine.
The original operation manual is in German. Other language versions are translations from German.
USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid any risk of injury from fire or electric shock, please follow the basic safety instructions when using
this device. Please read the instructions carefully and make sure that you have understood them well. Keep
the manual near the equipment to be able to read it at any time. Always use current sources connected to
the ground that provide the correct voltage (indicated on the label on the device). If you have any doubts,
let an electrician check that the connection is properly grounded. Never use a defective power cable. Do
not open the unit in damp or wet environment, or if your hands or body are damp or wet. Protect the unit
from solar radiation. Use the device in a protected place to avoid damaging the equipment or putting at risk
others. Make sure the device is able to cool and avoid placing it too close to other devices that produce
heat. Before cleaning the machine, disconnect it from the power source. Use a soft damp cloth for cleaning.
Avoid using detergents and make sure that no liquid enters the unit. No internal element of this device
needs to be maintained by the user. Opening the device without our approval leads to a loss of warranty!
SAFETY GUIDELINES
1. Please read and understand these instructions carefully before using the device! Please observe the
safety guidelines carefully in order to prevent damages through improper use!
2. Please keep this manual available for future reference. If this device is passed on to third parties, the
manual must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting from improper use or incorrect operation.
5. Before using this device for the first time, please check whether the main voltage type and current
comply with the indicated data on the type plate.
6. This device is not intended to be used by persons (including children) with limited physical, sensory
or mental capabilities or lack of experience and/or knowledge, unless they are supervised by a person
responsible for their safety or have received instruction as to how the device is used.
7. ELECTRIC SHOCK HAZARD! Do not try to repair the unit yourself. In case of device failures, repairs
must be done by qualified experts.
8. Please check the main plug and power cable regularly. If the power cable for this device is damaged, it
has to be replaced by the manufacturer or its customer service or another qualified person in order
to prevent hazards.
9. Prevent damages to the power cable by avoiding squeezing or bending it or rubbing it on sharp edges.
Also keep the power cable away from hot surfaces and open flames.
10
10. ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
11. Under no circumstances should the housing be opened.
12. When in use do not look directly at the emitter.
13. The device heats up to extremely high temperatures. Even after work, the device may remain hot for
some time. Do not touch hot parts of the machine.

TECHNICAL DATA

Product name
Model
Nominal power supply [V]/
Frequency [Hz]
Rated power [W]
Time scope [min]
Temperature range [°C]
Temperature adjustment
Weight [kg]
* Temperature depends on the distance between IR emitter and workpiece
SCOPE OF THE APPLICATION
The IR emitter is designed for drying all materials used in bodywork repairs.
The user is liable for any damage resulting from non-intended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for defects and open the packaging if there are no damages.
If the packaging is damaged, please contact your transport company and distributor within 3 days, and
document the damages as detailed as possible. Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
POSITIONING THE MACHINE
The machine should be positioned on a dry and stable surface, vertically so as to prevent movement during
operation. The machine should be positioned on a flat, level surface, with sufficient load capacity for the
machine and its contents. Ensure unobstructed access to the electricity plug at all times. Make sure the
power source reflects the parameters on the rating plate! Prior to first use remove and wash all elements
and wash the entire machine.
MACHINE OPERATION – BASICS
IR-DRYER3000.2 | IR-DRYER3000.1 | IR-DRYER2000.1
4
6
7
8
Rev. 05.06.2017 Rev. 05.06.2017
INFRARED PAINT DRYER
IR-DRYER3000.2 IR-DRYER3000.1
3 x 1100 3 x 1100
0-99 0-99
40-100* 40-100
YES* YES
47 48
Device description
2
1
1. IR unit
2. Unit support
3
3. Actuator
4. On/Off switch
5
5. Lever
6. Support post
7. Bottom frame
8. Wheels
IR-DRYER2000.1 IR-DRYER2000.2 IR-DRYER1000
230~/50
2 x 1100 2 x 1100 1100
0-99 0-60 0-60
40-100* 40-100* 40-100*
YES* YES* YES*
39 15 14
11