Introduction - Purpose Of The Manual/Field Of Application; Warranty (Only For Italy); Symbols And Terminology - Arneg HPF Manuel D'installation Et De Service

1. Introduction - Purpose of the manual/Field of application

This instruction manual refers to High Power Flexible condenser unit.
The documentation for the unit consists of:
- Manual for use and maintenance;
- Manual of Technical Data;
- Conformity certificate;
- Electric diagrams of system;
- Diagrams of refrigeration circuits of the system.
The following information serves to provide instructions relative to:
- Technical features;
- Installation and assembly;
- Use of the unit;
- Information for personnel assigned to its use;
- Operations of maintenance.
The manual is to be considered part of the system and should be kept for its entire life.
The manufacturer is not liable for any damages in the following cases:
- Improper use of the unit;
- Installation not made correctly, not made according to the instructions;
- Defects of the power supply;
- Grave neglect of the required maintenance;
- Unauthorized alterations and repairs;
- Use of other than original replacements;
- Partial or total failure to follow the instructions;
Note: Electric devices can be hazardous for health.
The regulations and laws in force must be respected during installation and use.
Any person who uses this unit should read this manual.

2. Warranty (only for Italy)

HPF units are covered by a one year warranty from the time of testing the system.
The warranty covers the labor and materials necessary to restore correct operation of the unit in case of problems
deriving from manufacturing errors or flaws.
The warranty does not cover repairs necessary because of malfunctions caused by improper use of the unit, failure
to follow the instructions provided in the documentation, including this manual.
If a "Service Contract" is stipulated, reference should be made to it for determination of the costs and obligations for
the account of each of the parties.

3. Symbols and terminology

Superfici calde
Hot surfaces
Tensione elettrica pericolosa
Danger high voltage
Pericolo
Danger
05060044 00 15/07/2004
Indicates hot surfaces.
It is placed near mechanical parts capable of reaching temperatures high enough to cause
burns.
Indicates danger due to the presence of powered parts.
It is placed where there is a risk of electrocution.
Indication of generic danger.
It is placed near mechanical parts that can cause mechanical or generic risks.
Note: Read carefully, do not cover, damage or replace the above symbols.
HPF
English
15