Switching The Appliance On; Operating Tips; Set The Language; Setting The Temperature Unit - Bosch B30BB.. Notice D'utilisation

en-us

Switching the appliance on

Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
The factory has recommended the following
temperatures:
Refrigerator compartment: +37 °F
■
Freezer compartment: 0 °F
■

Operating tips

The appliance features a rail which is fitted to the left
door.
The door of the refrigerator compartment can be
opened without having to first open the right door.
A heating element is integrated into the bar in order
to avoid condensation. This can be switched on
and off.
,
CAUTION:
To prevent damage to the appliance
or the furniture fronts, fold the rail when closing
the door.
Switching heating on and off
Simultaneously hold down the alarm button and
the refrigerator compartment super button for
3 seconds.
When the heating element is activated, the following
message lights up in the display panel:
10

Set the language

The display languages can be changed according
to the table in the chapter Setup mode.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set
language is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.

Setting the temperature unit

The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the @ or A setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.

Setting the temperature

Refrigerator compartment

(can be selected from +35 °F to +46 °F)
We recommend a setting of +37 °F.
Perishable food should not be stored above +37 °F.
1. Activate the setup mode with the selection button ¿.
2. Set the temperature with the @ (warmer) or A
(cooler) selection buttons.

Freezer compartment

(can be selected from +7 °F to –9 °F)
We recommend a setting of 0 °F.
1. Activate the setup mode with the selection button ¾.
The symbol ¸ is displayed.
2. Set the temperature with the @ (warmer) or A
(cooler) selection buttons.