Burda PERFECTCLIME PCE05 Montage Et Mode D'emploi page 10

C
ONNECTING FLEXIBLE MIST HOSES
Diagram A
C S S
ONNECTING TAINLESS TEEL
Diagram B
P A, tighten the nozzles, connectors after ighten the nozzles, connectors after
ER DIAGRAM
installation securely to ensure the nozzles / connectors ensure the nozzles / connectors
does not leak.
P
IPELINES
Inlet
Code Description Description
01 Quick Connector Quick Connector
02 Quick Connector Quick Connector
03 Flexible Mist Hose Flexible Mist Hose
04 O-ring
05 Connector
06 Nozzle
07 Flexible Mist Hose Flexible Mist Hose
08 Ball Valve
Code Description Description
04 Connector
05 Set Pin
06 Gasket
07 O-Ring
08 Nut
09 Pipe
12 Ball Cock
P B, assemble the connector by placing assemble the connector by placing parts on
ER DIAGRAM
the pipe in this order: No.8→No.6
(2pcs). The peg in the center of the crescent The peg in the center of the crescent-shaped pin
(No.5) should fit into the hole on the side of pipe. Then, (No.5) should fit into the hole on the side of pipe. Then,
fasten the nut (No.8) to the connector body. fasten the nut (No.8) to the connector body.
Power Switch
Twin Timer Timer
Air Release Air Release
Outlet
Pressure Release
GB
No.6→No.7→No.6→No.5