Channels; Set Channel; Block Channel - Velux KLF 100 Notice D'utilisation

Channels

C

Set channel

The system can send and receive commands on eight
channels.
0 Personal safety
1 Product safety
2 Operation - high
3 Operation - normal
4 Automatic - 1
5 Automatic - 2
6 Automatic - 3
7 Automatic - 4
A VELUX remote control sends on channel 3. Channels 4
to 7 are intended for automatic functions.
The interface/repeater unit can send on one channel only
and it is recommended to choose channel 7.
1
Press to choose channel.
Press "Enter" to confirm your choice.
2
The display shows that the chosen channel has been
saved.
After a short time, menu item
D
16 VELUX
A B
SET CHANNEL
Channel 6
Channel 7
Enter
INFORMATION
Channel saved
is displayed.
ENGLISH
D

Block channel

You can block commands from other interfaces/repeater
units or remote controls for 30 minutes from the time of
sending the command. Each channel (3-7) must be blocked
individually. In this way, you can give some commands
priority to others. See the example on page 19.
1
Press
Press
to be edited.
2
Press
Press
3
The blocked channel has been ticked. Repeat items 1-2 to
block additional channels if required.
Press
C D E F G H
4
Press
Back
Press
5
The display shows that the channel(s) has/have been
blocked.
Back
After a short time, menu item
to highlight the channel to be blocked.
"Edit" to confirm that the channel in question is
to highlight "Select".
"Enter" to confirm your choice.
"Edit" to undo or save the settings.
to highlight "Save".
"Enter" to confirm your choice.
is displayed.
E
ENGLISH
A B C D E F G H
BLOCk CHANNEL
Channel 5
Channel 6
Edit Back
A B C D E F G H
BLOCk CHANNEL
Select
Save
Enter Back
A B C D E F G H
BLOCk CHANNEL
Channel 5
Channel 6
Edit Back
A B C D E F G H
BLOCk CHANNEL
Deselect
Save
Enter Back
INFORMATION
Channel blocked
Back
VELUX 17