Masquer les pouces Voir aussi pour 2600T&B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The 2600T&B series is expandable, it can be used with
one or two collars. The transmitter has a toggle switch
located above the Nick button. This toggle switch allows
for selection of the orange or the green collar.
Set the toggle switch on the green position to select the
green collar and the orange position to select the orange
collar. The stimulation (Nick and Constant) along with
the beeper and Locate modes will only operate when
the toggle is in the desired position for the appropriate
receiver/collar.
56
Dog Collar
Toggle Switch

3. BEEPER SOUND

When you press the Mode button the first time, the collar
will beep twice. The beeper unit will always start in Run/
Point mode. The beeper will sound every 7 seconds while
the dog is running, and every 2 seconds when the dog
is on point or becomes stationary. The second time you
push the Mode button, it will beep once and remain silent
while the dog is running and beep every 2 seconds when
the dog is on point or stationary.
To turn the beeper unit off, press the Mode button a third
time. The unit will emit three rapid beeps, and the beeper
will turn off. The Locate mode can still be used!
Initial Beeper
Mode
Sound
Press
Run/Point
2 Beeps
Mode
1st Time
Point-Only
Press
1 Beep
2nd Time
Mode
Press
No Beeper
3 Beeps
3rd Time
Mode
Note: The Locate button can be used in any mode you
are in.
Action
- Dog running/moving: emits
double beep every 7 seconds
- Dog stationary/pointing: emits
double beep every 2 seconds
- Dog running/moving: silent
- Dog stationary/pointing: emits
double beep every 2 seconds
No sound
57

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2602t&b

Table des Matières