Customizations; Setup Menu; Set The Summer/Winter Functioning Mode; Set The Temperature Levels - Bticino HC4451 Manuel D'utilisation

Setup menu


The setup menu lets you customize some parameters or functioning
modes of the Chronothermostat.
M A I N S C R E E N
M o d e
P r o g r a m m i n g
S e t u p

 Set the Summer/Winter functioning mode

Sets the system functioning mode (default is Winter):
Summer = cooling, Winter = heating
• Use the ÅÇ keys to select the option "Summer/Winter"
• Press OK to confirm
A screen will be displayed showing the indication of the function-
ing mode being used.
• Press OK to switch over the functioning mode
• Press C to exit the menu and to return to the previous page.
After switching over, the system will set to the Antifreeze mode (for
Winter) or Thermal protection (for Summer).

 Set the Temperature levels

You can set the level of the Antifreeze temperature or Thermal
protection T* and the temperature levels T1, T2 and T3 used in
the weekly programmes.
The default values are:
Winter T*=7°C, T1=18°C, T2=20°C, T3=22°C
Summer T*=35°C, T1=20°C, T2=23°C, T3=25°C
• Use the ÅÇ keys to select the option "Temperature"
• Press OK to confirm
• Use the ÉÑ keys to select the temperature level
• Use the ÅÇ keys to set the value of the required temperature
• Press OK to confirm and to go back to the previous page or press
C to exit the menu and to return to the previous page, hence
cancelling the change.

 Set the Date and Time

For proper operation of your system, make sure that the date and
time are set correctly.
• Use the ÅÇ keys to select the option "Date and Time"
• Press OK to confirm
• Set time and date with keys:
ÅÇ increases/decreases the selected digit,
ÉÑ scrolls the time and date digits;
• Press OK to confirm and to go back to the previous page or press
C to exit the menu and to return to the previous page, hence
cancelling the change.

 Set the Daylight saving time

For proper operation of your system, make sure that the date and
time are set correctly.
• Use the ÅÇ keys to select the option "Daylight saving time"
• Press OK to confirm
A screen will be displayed showing the indication of the status.
• Press OK to switch over the functioning mode
• Press C to exit the menu and to return to the previous page.
57

Customizations

2