Scroll The Modes; Change The Weekly Mode; Change The Manual Mode; Change The Holidays Mode - Bticino HC4451 Manuel D'utilisation

 Scroll the modes

When the Chronothermostat display shows the Screen saver (or
when it is off), the preset functioning mode will be displayed if any
key is pressed.
• Use the ÉÑ keys to view the other modes: Weekly, Manual,
Holidays, Timed, Antifreeze and Off.
The name of the selected mode flashes to indicate the modifica-
tion status: if it is not confirmed (by pressing OK) or, if a key is not
pressed for more than 10 seconds, the operation will be cancelled,
thus displaying the main screen with the current mode.
To set the functioning mode displayed:
• Use the OK key to confirm
the Chronothermostat is now working under the new mode.
Depending on the mode selected, the following modification func-
tions will be possible.

 Change the Weekly mode

• Use the ÉÑ keys to select the "Weekly" mode
The number of the operative programme flashes as well as the square
corresponding to the time.
• Use the ÅÇ keys to scroll the three programmes and to display
the daily profile.
Select the required programme; when the number of the programme
stops flashing, it will be possible to change the level of the current
temperature.
• Use the ÅÇ keys to select the level of the required temperature.
The profile displayed, starting from the flashing square, will be
modified with the new temperature level, until the next level is
changed.
• Use the OK key to confirm
Introduction and standard functions

 Change the Manual mode

• Use the ÉÑ keys to select the "Manual" mode.
• Use the ÅÇ keys to increase or decrease the value of the preset
temperature.
• Use the OK key to confirm
or
the C key to cancel and return to the previous mode.
The Chronothermostat is now working under the new preset
mode.

 Change the Holidays mode

• Use the ÉÑ keys to select the "Holidays" mode.
• Use the OK key to confirm
When confirming, the Holidays Mode setup menu will be dis-
played;
• Use the ÉÑ and ÅÇ keys to set the time and data:
ÅÇ increases/decreases the selected digit
ÉÑ scrolls the time and date digits
• Use the OK key to confirm
• Use the ÅÇ keys to select the weekly programme to be reset at
the end of the Holidays period.
• Use the OK key to confirm
The display shows the Antifreeze or Thermal protection mode Icon
as well as the time and date of the Holidays programme end.
The Chronothermostat is now working under the new preset
mode.
55
1