HQ Power HQHZ10001 Mode D'emploi page 7

6. Installation

Only install and use the device on a flat and stable surface. The device may not be tilted.

Install the device in a location where you can easily access the power cord.

Install the device in a well-ventilated area.

The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.

Never stand directly below the device when it is being mounted, removed or serviced. Have a
qualified technician check the device once a year and once before you bring it into service.

Install the device in a location with few passers-by that is inaccessible to unauthorised persons.

Make sure there is no flammable material within a 0.5 m radius of the device.
7. Operation
7.1 HQHZ10001
1. Make sure to fill the tank with hazer liquid.
2. Switch on the device.
3. Set the output level and press the manual button on the remote control to trigger the fog output.
The device will continue to output fog as long as the button is pressed.
You can also choose a continuous or timed output.
4. Switch off the device after use.
The manual fog button on the rear of the device must not be activated
7.2 HQHZ10002
Control Panel Description
FUNCTION enter the programming mode
VOLUME output volume control
TIMER start timer operation
MANUAL manual fog output
UP upwards through the menu list
DOWN downwards through the menu list
V. 01 – 21/12/2015
HQHZ10001/HQHZ10002
1. interval button
2. duration button
3. output button
4. timer button
5. continuous button
6. manual button
Buttons 1 and 2 only work in timer mode.
while activating the timer button on the remote control.
7 ©Velleman nv