Default Settings - Victron energy Phoenix Multi Compact 12/800/35 Manuel D'utilisation Et D'installation

Settings may only be changed by a qualified engineer
Carefully read the instructions before changes are made.
Batteries should be placed in a dry and well-ventilated area during charging.

4.1 Default Settings

Inverter Voltage
Charger on/ off
Charge curve
Charging Current
Absorption Voltage
Absorption Time/ Maximum Absorption Time
Float Voltage
Repeated Absorption Time
Repeated Absorption Interval
Bulk Protection
AC Waveform Check
PowerAssist (MultiPlus only)
Generator/ Shore Current
System frequency
AES (automatic economy switch)
4.2 Settings which can be changed with the dipswitches
Type Battery Type
1 Sonnenschein
(default) Dryfit A200 Gel
2 Traction
(tubular cell)
3 Semi Traction 1
(flat plate)
1
4 Low antimony
1
The optimal absorption voltage for flat plate lead acid batteries is subject to mechanical and chemical
properties. Batteries with high antimony content can typically be charged with a lower absorption voltage
than batteries with low antimony content. (Please refer to our book "Electricity on Board" downloadable
from our website www. victronenergy.com for details and suggestions about charging batteries). Contact
your battery supplier for the correct charge voltages and change (with VE-configure) the voltage settings if
required. The default charge current setting is 75% of the maximum charge current. This current will be too
high for most applications. For most battery Types the optimal charge current is 0.1-0.2x the battery
capacity.
4 SETTINGS
230 Vac
on
Adaptive charging, gel cell
75% of maximum charging current
14.4V / 28.8V / 57.6 Vdc
4 hours
13.8V / 27.6V / 55.2 Vdc
1 hour
7 days
on
on
on
12A
- Multi Compact/ MultiPlus Compact = Automatic
- Inverter Compact = 50 Hz
off
Absorption voltage
14.4 V 28.8 V 57.6V
15.0 V 30.0 V 60.0V
14.4 V 28.8 V 57.6V
14.8 V 29.6 V 59.2V
Float voltage
13.8 V/ 27.6 V/ 55.2V
13.2V 26.4V 52.8V
13.8 V/ 27.6 V/ 55.4V
13.2V 26.4V 52.8V
14.0 V/ 28.0 V/ 56V
13.2V 26.4V 52.8V
14.0 V/ 28.0 V/ 56V
13.2V 26.4V 52.8V
Maximum
absorption
time
4 hours
6 hours
5 hours
5 hours
15