Safety Instructions - Ibiza Light LSM500LAS Manuel D'utilisation

Safety Instructions

Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the bottom of the fixture.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be
sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size
and type.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
• Don't connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall
be destroyed.
• Avoid direct eye exposure to the light source while it is on.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
OPERATION
The device operates to the rhythm of the music. When there is no sound, the unit runs automatically.
Plug the unit into an appropriate mains outlet that supplies the required voltage for the unit and it will start working.
Fixture Cleaning
•
Clean with soft cloth using normal glass cleaning fluid.
• Always dry the parts carefully.
Specifications
Voltage: ................................................................................................................... 220-240V / 50-60Hz
Fuse: ........................................................................................................................................ 2A
Power consumption: ..........................................................................................................................................15W
Light source - ASTRO: ......................................................................................................... 3pc of 3W LED
Light source – UFO: .......................................................................... 48 x 10mmØ RGB LEDs
Operating modes: ................................................................................. Sound control, Auto-run
Max. Ta ................................................................................................................................. 40°C
Dimensions ................................................................................. 136 (L) × 136 (W) × 136 (H)mm
N.W: ..................................................................................................................................... 280g
©Copyright LOTRONIC 2013
GB
Page 2