Adjusting The Sound Characteristics - Sony CDX-MP80 Mode D'emploi

(With optional unit)
To
Skip discs
– Disc selection
Skip albums
– Album selection
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
20
Do this
Push in and rotate [once for
each disc] the control.
To continuously skip discs,
push in and rotate once and
rotate again within 1 second
(and hold) the control.
Push in and rotate the
control [hold for a moment]
and release.
To continuously skip
albums, push in and rotate
again (and hold) within 1
second of first releasing the
control.
To decrease
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
The bass and treble levels and subwoofer volume
can be stored independently for each source.
VOL control dial
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press the VOL control dial repeatedly
to select the item you want to adjust.
Each time you press the VOL control dial, the
item changes as follows:
DSO t EQ7 t BAS (bass)
t TRE (treble) t BAL (left-right)
t FAD (front-rear)
t SUB (subwoofer volume)
3
Rotate the VOL control dial to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.