Locating A Disc - Sony CDX-MP80 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-MP80:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To
Stop playback
Eject the disc
Skip tracks
– Automatic
Music Sensor
Fast-forward/
reverse
– Manual Search
Skip albums*
– Album selection
* Available only when an MP3 file is played.
To remove the disc, press down the center
spindle, and lift up the edge of the disc from the
relief in the disc tray.
Notes
• Depending on the recording method used on the
disc, it may take a minute or more before playing the
first track.
• Depending on the condition of the disc, it may not
play back (page 7, 8).
• Such discs should be finalized.
• While the first/last track on the disc is playing, if the
./> control dial is rotated, playback skips to
the last/first track of the disc.
• When the last track on the disc is over, playback
restarts from the first track of the disc.
• With optional unit connected, playback of the same
source will continue on to the optional CD/MD unit.
• There is a delay for a few seconds after pressing Z
before the disc tray is ejected, after reading the data
in the disc.)
12
./> control
dial
Do this
Press (OFF).
Press Z.
Rotate the ./>
control dial.
Press and hold the –m or
M+ button, and release at
the desired point.
Press (LIST), then rotate the
./> control dial.
(With optional unit)
1
Press (SOURCE) repeatedly to select
"CD" or "MD (MS*)."
2
Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
* MS: MG Memory Stick System-up Player MGS-X1.
Cautions when connecting MGS-X1 and MD unit(s)
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press (SOURCE) to
select "MS" or "MD." If "MS" appears in the source
display, MGS-X1 starts to play. If "MD" appears in
the source display, press (MODE) to select "MS," to
start playback.
• When you want to play an MD unit, press (SOURCE)
to select "MD" or "MS." If your desired MD unit
appears in the source display, it starts to play. If "MS"
or another MD unit appears in the source display,
press (MODE) to select your desired MD unit, to
start playback.

Locating a disc

— Disc selection
See "Locating a disc by name" on page 15.

Publicité

Table des Matières
loading

Table des Matières