Using Wine Cellar; Controls - Jenn-Air JUWFL242HL Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONTROLS

1
2
NOTE:
 When the wine cellar is turned On for the first time,
the temperature defaults to the recommended
setting.
 There are two adjustable temperature controls, one
for each compartment.
 The left temperature and preset touch pads control
the temperature of the upper compartment.
 The right temperature and preset touch pads control
the temperature of the lower compartment.
1.
Turning Control On/Off
The first time that the wine cellar is plugged in, the
control will be in Cool Off mode. Cool On and Cool Off
will be the only options that display.
Press COOL ON for 3 seconds to turn on the wine
cellar. All menus and recommended temperature
settings will be displayed.
2.
Auto Light Option
Features a proximity sensor in the base grille that
automatically ramps on the LED interior display
lighting when motion is detected. When motion is no
longer detected, the interior display light will turn off
after 2 minutes.
 Press the AUTO LIGHT option to activate this
feature.
 When the AUTO LIGHT is not activated, the
interior display light will only turn on when the
door is opened.
NOTE:
 Leaving the light on for an extended period of
time will slightly increase the temperature of the
wine cellar.
3.
Control Lock
Avoids unintended temperature changes and makes
it easy to clean the controls.
 To activate Lock Mode, press and hold LOCK for
3 seconds. After the countdown, all other displays
will turn off and become unavailable except Cool
On, Cool Off and Lock.

USING WINE CELLAR

3
4
5
6
5
4
4.
Using Presets
For your convenience, your wine cellar also has
controls that are preset to recommended storage
temperature for specific wines. Pressing any preset
option will set the temperature to the recommended
temperature for the specified wine:
 Assorted: 54°F (12°C)
 Champagne: 46°F (7°C)
 Red Wine: 64°F (17°C)
 Sweet Wine: 42°F (5°C)
 White Wine: 50°F (10°C)
5.
Adjusting the Temperatures
To adjust set point temperatures, press "+" (plus) or
"-" (minus) until the desired temperature setting is
reached. The control is set correctly when the wine is
as cold as you like it.
NOTE:
 The set point for the wine cellar is 50°F (10°C) for
both the upper and lower compartments. The set
point range for the upper compartment is 42°F to
54°F (5°C to 12°C) and 42°F to 64°F (5°C to 17°C) for
the lower compartment.
 Wait at least 24 hours between adjustments
for the product to acclimate. Recheck
the temperatures before making further
adjustments.
6.
Viewing Celsius/Fahrenheit
Temperatures
Press the F/C touch pad to toggle between displaying
the temperature in degrees Fahrenheit and degrees
Celsius. The corresponding indicator will illuminate.
7.
Sabbath Mode
Allows the door of the wine cellar to be opened or
closed on the Sabbath or other religious holidays
without directly turning on or off any lights, digital
readouts, fans, valves, tones or alarms. By selecting
this feature, the temperature set points remain
unchanged, but the control panel lights, interior
lights, and control audio turn off. For most efficient
wine cellar operation, it is recommended to exit the
Sabbath Mode when it is no longer required.
 Press and hold SABBATH for 3 seconds to turn on
the feature. After the 3 second countdown, the
feature will activate and all other displays will turn
Off.
 Press and hold SABBATH for 3 seconds to turn off
the feature and turn on the display.
7
8
9
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Juwfl242hm

Table des Matières