Usb Data Interface; Troubleshooting - VOLTCRAFT CHARGE MANAGER 2016 Notice D'emploi

14. USB DATA INTERFACE

The „Charge Manager 2016" has a USB interface on the rear of the device (USB-B socket).
This USB interface can be used to connect the „Charge Manager 2016" to a PC and to
submit all displayed battery data and parameters to a PC.
The corresponding Windows software can be downloaded free of charge at the item page
for the „Charge Manager 2016", www.conrad.com.

15. TROUBLESHOOTING

By purchasing this charging device you have acquired a product that has been designed to
the state of the art and is operationally reliable. Nevertheless, problems or errors may
occur. Therefore, we would like to describe to you how to remove possible interferences.
No function or no display
• Is the hollow plug of the mains adapter correctly plugged into the charger socket?
• Is the mains adapter correctly plugged into the mains socket and is the mains voltage
present?
• Device in power saving mode - push the „OK" button
No battery identified
• Are the contacts of the charge slot or battery contaminated? If required, clean it with a
clean, dry cloth.
• The battery has not been inserted properly. Observe polarity!
Device temperature too high (display „OVERTEMP!!! Please Wait")
• The charger is overheated. After the cooling phase, the programme is continued
automatically. If required, ensure a cooler ambience temperature (e.g. do not operate the
charger at direct sun irradiation).
50