entrematic Ditec COME Manuel D'installation page 7

Operating modes
Mono-directional.
Mono-directional opposite side.
(flashing LED).
Bi-directional.
Partial opening.
(Only for mono-directional and bi-directional).
NOTE: if the automation has 2 swinging wings, it
allows 1 wing opening only.
Sliding door open.
Swing door open.
Delayed night locking (STOP).
Start the sequence: bi-directional (10 s with J1=ON; 60
s with J1=OFF) door closed (max 60 s)
Immediate night locking (STOP).
Sliding door closed.
Swing door closed.
Opening command.
POWER RESET.
Deletes all data learned by the control panel.
Code setting (J3=ON).
NOTE: the code has a maximum of 5 digits.
During the setting operation the red led flashes.
Code erasing (J3=ON)
NOTE: during the erasing operation the red led flashes. Key
Selector without access code
1
Key 1
1
Key 1
3 s
2
Key 2
3
Key 3
4
Key 4
4
Key 4
5
Key 5
STOP.
5
Key 5
3 s
6
Key 6
6
Key 6
Key + any key
1
Key 1 + key 5
Key CODE
3 s
CODE
3 s
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
Key
5
CODE
key
3 s
key
3 s
7
Selector with access code
1
key 1
1
key 1
3 s
2
key 2
3
key 3
4
key 4
4
key 4
5
key 5
5
key 5
3 s
6
key 6
6
key 6
+ CODE
1 5
key 1 + key 5