Filling In Water; Setting The Temperature; Symbols; Steaming - Rotel U915CH1 Mode D'emploi

• FILLING IN WATER

o CAUTION! Always unplug the appliance before filling or emptying the tank. Never
place the iron under running water. Always use the enclosed measuring cup.
o Proceed as follows:
Set the steam control dial (6) to "0".

Tilt the iron, place the beak of the measuring cup on the filling port and slowly

pour the water into the tank.
Then set down the iron in a vertical position and set the desired temperature

using the temperature dial.
Plug in the iron and wait until the indicator lamp switches off.


• SETTING THE TEMPERATURE

o Select the desired temperature on the temperature dial. Set the iron down in a ver-
tical position and plug it in. The temperature dial lamp will light up, indicating that
the iron is heating up.

• SYMBOLS

• Low temperature. Synthetic fibres
•• Medium temperature. Silk, wool
••• High temperature / steam. Cotton, linen

• STEAMING

o Turn the temperature dial to the desired temperature in the steaming range. Set the
iron down in a vertical position and wait until the indicator lamp switches off. Set the
steam control dial (6) to the desired steam volume and wait until steam appears be-
fore starting to iron. Setting down the iron in a vertical position automatically inter-
rupts the discharge of steam. You can also interrupt the discharge at any time by
setting the steam control dial to "0". The iron has a display window that indicates the
water level in the tank.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
27