Symbols In The Display - Hilti PS 35 Mode D'emploi

2.7 Detection zone
Detection display
2.8 Menus
Menus

2.9 Symbols in the display

Ferrous metal
0 I 0 I
Non-ferrous metal
0 I 0 I
Measuring units
mm
inch
inch mm inch mm
Limited depth scan (mm)
0 25 50 75 0 25 50 75
Limited depth scan (inches)
0 1 2 3 0 1 2
1
Shows the area in the detection zone
2
Display shown when navigating through the menus.
active (left)
inactive (right)
active (left)
inactive (right)
inches active (left)
mm active (right)
active (left)
inactive (right)
active (left)
inactive (right)
3
@
;
2
1
@
;
0 I
Signal strength indicator
Depth measurement in mm or
inches
Status area, shows the current
menu settings
Status: 0 is "Off" and I is "On".
The symbol on the white back-
ground is active.
en
15