General Information - Hilti PS 35 Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
PS 35 ferrodetector
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Technical data
4 Safety instructions
5 Before use
6 Operation
7 Care and maintenance
8 Troubleshooting
9 Disposal
10 Manufacturer's warranty
11 FCC statement (applicable in US) / ICES
statement (applicable in Canada)
12 EC declaration of conformity (original)
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1 These numbers refer to the illustrations. You can
find the illustrations at the beginning of the operating
instructions.
In these operating instructions, the designation "the tool"
always refers to the PS 35 Ferrodetector.
Parts, operating controls and indicators 1
On/off button
@
Scan and settings button
;
Arrow buttons for navigating in menus
=
Status LEDs (red / green)
Page
%
Marking opening
13
&
Display
14
(
Battery compartment
17
)
18
19
19
21
22
22
23
23
23
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Symbols
Read the
operating
instructions
before use.
Return
materials for
recycling
en
13