- If the product is of the grounding type, the extension cord must be a grounding-type
3-wire cord.
- Arrange the longer cord so that it will not drape over a countertop or tabletop where
it can be tripped over, snagged, or pulled on unintentionally (especially by children).
DO NOT alter the plug. DO NOT attempt to defeat the safety purpose of the
polarized plug.
BEFORE FIRST USE
Read the instructions before first use
WARNING: Do not touch hot surfaces. Always use the lid handle to lift the cover while
it is in use. Use protective oven mitts or gloves to avoid burns or serious personal
injury.
•
When using for the first time, remove all packaging materials and unwind the power
cord from the appliance.
•
Thoroughly clean the dual-sided hot pot and tempered glass lid with a hot, soapy
cloth/sponge, ensuring that water or soap does not enter the socket. The cord plug
and temperature control dial are not dishwasher safe and cannot be immersed in
water at any time.
•
Rinse with hot water and thoroughly dry.
•
Ensure the socket and electrical pins are completely dry before using.
TO ASSEMBLE
CAUTION: Ensure the temperature control dial is set to "OFF", the power cord is
unplugged from the electrical outlet, and the product has thoroughly cooled before
attaching or detaching the temperature control dial. Do not use appliance without the
cool touch base well placed and attached.
1.
Locate the lid handle bag. To assemble the lid handle used a Philips-head
screwdriver.
2.
Attach the lid handle to the tempered glass lid by aligning the hole in the lid handle
with the hole in the tempered glass lid, and then secure with bolt the silicone washer
and the metal washer together. NOTE: Do not over-tighten the bolt.
Place the dual-sided hot pot inside the cool touch base. NOTE: Make sure the dual-
3.
sided hot pot and the cool touch base are well secure and properly placed.
4.
Plug the temperature control dial probe into the dual-sided hot pot.
WARNING: Ensure the electric dual-sided hot pot is unplugged from the electrical
outlet and allow it to cool before handling or cleaning it.
4