Sony RM-TP1 Mode D'emploi page 25

To start Macro Play
automatically (MACRO LINK)
You can link the remote (component) to
operate the Macro Play automatically when the
remote (component) is selected.
The following procedure uses an example to
execute MACRO4 when "DVD" is selected in
the RM SELECT screen.
AUTO POWER function
When Sony components are registered and the remote
(component) is selected, this function enables you to
turn on the component automatically. Besides, when
Sony video components (VCR, DVD, etc.) are
registered and the remote (component) is selected,
this function enables you to turn on both TV and the
component, and switch the input of the TV
automatically.
1
Touch RM SELECT.
The RM SELECT screen appears.
2
Turn the jog dial to select the remote
(component) you want to link to the
Macro Play ("DVD" for example).
When you touch the remote (component),
touch B to display the RM SELECT screen.
3
Touch .
The pull-down menu appears.
4
Touch MACRO LINK in the pull-down
menu.
The MACRO LINK screen appears.
5
Select the Macro Play ("MACRO4" for
example) you want to link to the remote
(component).
A check ( ) appears in front of the selected
Macro Play.
6
Touch EXIT.
The RM SELECT screen reappears.
M appears in the box of the remote
(component) selected in step 2.
continued
GB
25