Sony RM-TP1 Mode D'emploi page 14

Operating the components
(continued)
Key Function
FRONT To adjust the balance between front left
BALANCE and right speakers.
2)
L/R
LEVEL To adjust the level of the center
CENTER speaker.
2)
+/–
LEVEL SUB To adjust the level of the sub woofer.
WOOFER
2)
+/–
2)
EQ To turn the equalizer on/off.
TEST To output the test tone.
2)
TONE
ON To activate the on-screen display.
2)
SCREEN
2)
v/V/b/B To select a menu item.
2)
MENU To select the menu.
2)
ENTER To enter the selection.
2)
DISPLAY To select the displayed information.
2)
DIMMER To adjust the brightness of the display.
2)
INPUT </> To select the audio input.
AUDIO To assign the audio input for each
2)
SPLIT function.
INPUT To select the input mode for your
2)
MODE digital components.
+12V To turn on or off the 12V TRIGGER
TRIGGER function.
OFF/ON
1)
You can use the buttons on the front panel.
2)
Sony amplifier/receiver only. For details, see page
19.
For details on the controls of each key, refer to
the operating instructions supplied with the
amplifier/receiver.
GB
14
VIDEO
Key Function
POWER To turn the power on/off.
INPUT To change the input mode of the VCR.
SELECT
Z
To eject the video tape.
,
To rewind at high speed.
X2 To play in the double speed.
CH +/– To select a channel.
.
To proceed to the previous location.
m
To rewind.
N To play.
M
To fast-forward.
> To proceed to the next location.
z
To record.
x
To stop.
X
To pause.
DISPLAY To select information displayed on the
TV screen.
ANT To switch the antenna output.
TV/VTR
SP/LP To select the playback speed.
1–9, 0 To select the channel.
Pressing 0 selects channel 10.
-/-- Press before selecting channel 11 or
higher. (After pressing -/--, use the
numeric buttons to select the channel,
then press ENTER.)
Or, press to select channel 11 directly.
ENTER To enter the selection.
Or, press to select channel 12 directly.
MENU To call the MENU display.
V/v/B/b To move the cursor.
ENTER To enter selections in the MENU
display.