Plein Air ALN-1200 Mode D'emploi page 11

10. If the appliance does not work properly, immediately turn it off and disconnect it from the mains
socket. For repairs, contact a technical support center authorized by the manufacturer, and require
that original spare parts be used. Using parts that do not conform to the product may seriously
compromise its correct operation.
11. This heater is hot when in use, in order to avoid burns do not touch the surface. Keep away from
combustible surfaces, curtains and furniture, etc. Keep the heater at least one meter away from
any surface.
12. Attention: the lamps are not replaceable.
13. In order to unplug the appliance, select "OFF" and disconnect the plug from the power socket.
ASSEMBLY
1. Assemble the heater main structure with the base, as indicated in the following sequences.
2. Remove the screws located on the bottom of the main structure.
3. Insert the cord in the hole located on the base.
4. Assemble the structure with the base using the two mounting screws previously removed.
5. Insert the power cord through the corresponding openings.
6. Make sure that the appliance is securely positioned and plug in the power cord.
FUNCTIONING
This heater is hot when in use, to avoid burns do not touch the surface. Keep away from combustible
surfaces, curtains and furniture, etc. Keep the heater at least one meter from any surface. Always place
the heater on the floor or on a stable surface in order to prevent dangerous falls. Connect the power
supply. The appliance is equipped with a knob to select the desired power and a practical automatic
oscillation function. Select the desired heating power. When the appliance is not in use disconnect from
power supply.
SAFETY MEASURES
To ensure its safe use, the appliance features a tip-over protection system. In case of accidental fall,
the appliance turns off automatically. CAUTION: If the heater is straightened automatically restarts.
MAINTENANCE
1. This appliance requires no maintenance except cleaning of its external surfaces.
2. Before cleaning the appliance, disconnect it from the mains socket and wait for it to cool down.
3. Dust the intake grill regularly, removing rope yarn, down or any other foreign matter that might limit
regular air circulation.
4. To clean external surfaces, use only a soft moistened cloth. Do not use solvents.
5. Do not throw the box, use it to store the equipment.
6. When you don't use the appliance, store it in its original packaging and store in a dry place.
Model: ALN-1200
Item
Heat output
Nominal heat output
DT Istr (ALN-1200) 02/20
INSTRUCTIONS FOR USE
Éteignez OFF
OFF
400W Minimum power heating function
800W Mean power heating function
1200W Maximum power heating function
Oscillating function with minimum power heating function
400W
Oscillating function with mean power heating function
800W
Oscillating function with maximum power heating function
1200W
Symbol Value Unit
P 1,2 kW
nom.
Item
Type of heat input, for electric storage local space
heaters only (select one)
manual heat charge control, with integrated
thermostat
ALN-1200
Unit
NO
11/12