dirna Bergstrom bycool blue line FLAT Instructions De Montage page 32

FLAT
ES
EN
Place cap on tank. Cut at 100mm, insert "T"
25
and connect to it smaller section hose, marked
with white tape Y (check that curve radius
is enough to avoid stranglings).
Connect wiring with sheath to evaporative
26
cooler boxes and water inlet hose.
A. Connect impulsion hose coming from
evaporative cooler to pump.
B. Connect pump wiring and level wiring.
Connect battery wiring.
27
A
27
32
®
25
26
B