1
Safety instructions
1.1
In general
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important information for
correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the product.
•
Use product, product parts and accessories only in perfect condition.
•
Compare the specifications of all used devices to ensure com-
patibility.
•
In case of questions, defects, mechanical damage, trouble and
other problems, non-recoverable by the documentation, contact
your dealer or producer.
•
Never operate irons, heaters and similar devices which cause
fire risk, with voltage converters.
•
Do NOT connect already connected devices to other interfaces
of the vehicle simultaneously.
•
Not recommended for children and people with physical and / or
mentally limited capabilities.
•
Use only with the vehicle stationary.
•
Not intended for commercial use.
Risk of electric shock
•
Do not open the housing.
•
Do not modify product and accessories.
•
Installation, assembly, maintenance and repair work must be
carried out only by trained electrical specialists.
•
Do not short connectors and circuits.
Hot surfaces
•
Do not touch during or immediately after use.
•
Avoid proximity to flammable surfaces.
Heat storage
•
Do not cover the product.
•
Keep fan slots and vents free.
•
Do not use in sealed environments.
Injury by cutting
•
Secure packaging, small parts and insulation against accidental
use.
Operation and storage conditions
•
For large temperature differences, wait a few minutes after
transport, to take the unit into operation.
•
Avoid stresses such as heat and cold, moisture and direct sun-
light, vibration and mechanical pressure.
•
Do not touch the product with wet hands.
•
Not in the vicinity of heating and battery mount.
•
Do not operate in explosive environments.
•
Operating elements of the vehicle must not be impaired by
mounting and use of the voltage converter.
•
Only use in dry ambience.
14