Multi-Cd Player - Pioneer SUPER TUNER III D FH-P5000MP Mode D'emploi

Multi-CD Player

Playing a CD
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Track number indicator
Shows the track currently playing.
2 Disc number indicator
Shows the disc currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis-
played.
2 Use Multi Control to adjust the sound
level.
Turn it to increase or decrease the volume.
3 Push Multi Control up or down to select
a disc you want to listen to.
# You can also select a disc you want to listen to
with the 16 buttons on the remote control.
4 To perform fast forward or reverse,
push and hold Multi Control left or right.
5 To skip back or forward to another
track, push Multi Control left or right.
Pushing Multi Control right skips to the start
of the next track. Pushing Multi Control left
once skips to the start of the current track.
Pushing again will skip to the previous track.
Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to the multi-CD player
owners manual.
! If there are no discs in the multi-CD player ma-
gazine, NO Disc is displayed.
! When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, the disc and track
titles automatically begin to scroll in the dis-
play. When Ever Scroll function is ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 48.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Section
08
31
En