Saeco DA 7P Mode D'emploi Et D'entretien page 23

11 - NRI G13 COIN VALIDATOR PROGRAMMING
• The vending machine is normally equipped with NRI G13
coin validator which can recognize up to 6 different coins
or money pieces.
• Values of the programmed coins are given in table (50),
positioned next to the coin validator(TK 2007 and TK 2008
point out 24 mm. and 28 mm. coins).
• The electronic control adds up the values of the inserted
50
coins (displaying the total amount) and allows the
dispensing of the chosen beverage according to two dif-
ferent prices (respectively price 1 and 2, Low and High
price ).
• The value of the two prices can be programmed with the
Dip-switches (52 and 53) as follows:
Set the value of the two prices (i.e.500 and 700) and divide
it by the value of the lowest coin, given in the table (i.e. 50).
You will get two numerical values:
500:50=10
700:50=14
Such numerical values have to be set on the two
Dip-switches (52 and 53):
Numerical value 10=2+8 Move positions 2 and 8 of
Dip-switch (52) upwards
Numerical value 14=2+4+8 Move positions 2, 4 and 8 of
Dip-switch (53) upwards
Prices 1 and 2 are automatically given to coins (TK 2007
and TK 2008).
• Furthermore it is possible to avoid that the coin validator
accepts one or more programmed coins by setting Dip-
54
switch (51), located under the removable cap (54), moving
upwards the cursors corresponding to the channels to be
locked.
51
52
53
English
23