Time Setting; Cleaning And Maintenance; Frequently Asked Questions - Byron DIC-24615 Mode D'emploi

4.11

TIME SETTING

A. Use the arrow keys to select the time setting icon
B. Press menu/ok to confirm.
C. Press left/right buttons to select the setting you want to change.
D. Press up/down buttons to adjust.
E. Press menu/ok to confirm.
4.12 UNLOCK TIME SETTING
This setting defines the duration of which the door lock stays
unlocked after pressing the "open door lock or gate button"
A. Use the arrow keys to select the unlock time icon ,
B. Press menu/ok to confirm.
C. Use the scroll keys to select between 100mS, 1S, 5S or 10S.
D. Confirm and exit by pressing the menu/ok button.
5

Cleaning and maintenance

• Clean the outside of the appliance with a soft and slightly
moistened cloth.
• Do not use any carboxylic cleaning agents or petrol, alcohol or
similar. These attack the surfaces of the devices. Besides, the
vapors are hazardous to your health and explosive. Do not use
any sharp edged tools, screw drivers, metal brushes or similar for
cleaning.
6

Frequently asked questions

Problem Solution
• The indoor unit does not
switch on.
• The ring tone volume is too
low.
• I connected the indoor unit to
a lock but it does not work.
• I hear interference on the
line.
• There is no sound between
the outdoor unit and the
indoor unit.
Instruction manual
• Make sure that the monitor is
connected to the power
source.
• Make sure the adapter plug is
properly pushed in to the
power outlet.
• Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
• Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
• Move other electronics away
from the unit to minimize
interference.
• Perhaps the cable is too long
or the wire too thin. Replace
the wire with a suitable one.
• The microphone may be
obstructed. Clean the
microphone.
• Check that the cables are
connected and fastened
properly.
EN
9